自上料攪拌車剎車失靈都有哪些原因?
概述:1、平時檢修不夠導致的自上料攪拌車剎車失靈1 Brake failure of self loading mixer due to insufficient maintenance平時對自
1、平時檢修不夠導致的自上料攪拌車剎車失靈
1. Brake failure of self loading mixer due to insufficient maintenance
平時對自上料攪拌車剎車系統缺乏保養,到關鍵需要它的時候,它很有可能罷工,從而釀成大禍。經常檢查剎車總泵、剎車分泵、儲氣筒和管線是否工作良好。出現漏氣和工作狀態不佳的應該立刻修復或者更換,平時行車中應該時刻注意儀表上氣壓的變化。
At ordinary times, there is a lack of maintenance for the brake system of the self feeding mixer. When the key needs it, it is likely to go on strike, thus causing great disaster. Always check whether the brake master cylinder, brake slave cylinder, air reservoir and pipeline work well. In case of air leakage and poor working condition, it should be repaired or replaced immediately. In normal driving, it should always pay attention to the change of air pressure on the instrument.
2、不合理的操作方法導致機件失靈
2. Unreasonable operation methods lead to machine failure
由于司機自身缺乏自上料攪拌車駕駛經驗,錯誤的操作自上料攪拌車導致機件失靈。下長坡時,掛低檔降低車速,利用發動機對車速進行牽制,盡量少用剎車防止剎車片過熱,踩剎車時用點剎而不要用“一腳悶”的方法。
Due to the driver's lack of driving experience, the wrong operation of the self feeding mixer leads to the failure of the parts. When going down a long slope, lower the speed, use the engine to control the speed, try to use less brakes to prevent overheating of the brake pads, and use the point brake instead of the "one foot stuffy" method when stepping on the brake.
3、嚴重超載,致使剎車失靈
3. Serious overload, resulting in brake failure
嚴重超載,自上料攪拌車的總質量增加,在重力加速度的作用下,加大了自上料攪拌車運動慣性,直接導致剎車失靈。超載車輛由于增加了車輛的總質量,從而增加了自上料攪拌車的運動慣性,在駕駛超載車輛時,一定要慢,不可為了趕時間而不顧生命。
Under the action of gravity acceleration, the motion inertia of self loading mixer increases, which directly leads to brake failure. Overload vehicles increase the total mass of the vehicle, thus increasing the movement inertia of the self loading mixer. When driving overload vehicles, it must be slow, not to rush without regard to life safety.