概述：自動混凝土攪拌車在使用過程中防抱死系統出現故障,從而影響攪拌車的正常工作 為了盡快故障,必須先找出故障的原因 下面小編根據從事攪拌
自動混凝土攪拌車在使用過程中防抱死系統出現故障,從而影響攪拌車的正常工作.為了盡快故障,必須先找出故障的原因.下面小編根據從事攪拌車維修的經驗,為大家介紹一下混凝土攪拌車防抱死系統出現故障時的檢查方法.
The anti lock system of the concrete mixer truck breaks down in the process of use, which affects the normal work of the truck mixer. In order to solve the problem as soon as possible, we must first find out the cause of the failure. According to the maintenance experience of the mixer truck, the following small series introduces the inspection method when the anti lock system of the concrete mixer fails
一、檢查混凝土攪拌車的駐車制動是否完全釋放。
1、 Check whether the parking brake of concrete mixer is fully released.
二、檢查制動儲液罐液面是否符合說明書的規定。
2、 Check whether the liquid level of the brake fluid reservoir meets the requirements of the manual.
三、檢查所有的制動管路有無損壞變形和泄漏跡象。
3、 Check all brake lines for signs of damage, deformation and leakage.
四、檢查防抱死系統的所有熔斷絲是否完好,導線是否破損,插座是否牢固。
4、 Check whether all fuse wires of anti lock system are in good condition, whether the wires are damaged and whether the socket is firm.
五、檢查蓄電池容量和電壓是否符合規定,正負極導線的連接是否可靠。
5、 Check whether the capacity and voltage of the battery meet the requirements, and whether the connection of the positive and negative leads is reliable.
六、檢查防抱死系統、ECI_I插接器連接是否牢靠。
6、 Check anti lock system, ECI_ I connector connection is reliable.
七、檢查電路連接處是否腐蝕、損壞、松脫或接觸不良,ABS的各搭鐵線搭鐵是否可靠。
7、 Check whether the circuit connection is corroded, damaged, loose or poor contact, and whether the grounding wire of ABS is reliable.
八、檢查輪胎是否符合要求。
8、 Check whether the tires meet the requirements.
九、檢查混凝土攪拌車的車輪轉動有無阻滯,輪轂軸承間隙是否正常。
9、 Check whether the wheel rotation of the concrete mixer truck is blocked and whether the hub bearing clearance is normal.
以上就是如何檢查自動混凝土攪拌車報死系統的要點介紹，感謝您的閱讀，希望對您有所幫助。
The above is how to check the automatic concrete mixer truck dead system, thank you for reading, hope to help you.
點擊撥打服務熱線：4008791999
