概述:大家都知道,鋼筋、混凝土是施工建設必不可少的材料,而且在混凝土的攪拌使用的過程中,水也是不能少的。水是自動攪拌車生產高質量混凝土的
大家都知道,鋼筋、混凝土是施工建設必不可少的材料,而且在混凝土的攪拌使用的過程中,水也是不能少的。水是自動攪拌車生產高質量混凝土的關鍵,而水資源在我國是相對匱乏的。除此之外,加上清洗設備、洗車、降塵等,每站如果全部采用自來水或地下水,則是一筆過大的消耗。那自動攪拌車攪拌時怎么省水呢??對此你了解多少呢?今天
自動攪拌車廠家的小編就這個問題給你介紹一下,希望對你有所幫助。
As we all know, steel and concrete are essential materials for construction, and in the process of concrete mixing, water is also indispensable. Water is the key to produce high quality concrete by automatic mixer, and water resources are relatively scarce in China. In addition, in addition to cleaning equipment, car washing, dust reduction and so on, if all stations use tap water or groundwater, it is an excessive consumption. How to save water when mixing with automatic mixer?? How much do you know about it? Today, the automatic mixer manufacturers Xiaobian on this issue to introduce you, I hope to help you.
想要省水,降低混凝土的單位立方米用水量的可能性和必要性不大,只能從水源上下手。比較有用的途徑為收集自然雨水。就北方而言,夏秋季常伴有充沛的降雨量,若能將此收集再利用,便能節約一大部分的地下水資源。
If you want to save water, it is not possible and necessary to reduce the water consumption per cubic meter of concrete. You can only start from the water source. A more useful way is to collect natural rainwater. As far as the north is concerned, there is abundant rainfall in summer and autumn. If the rainfall can be collected and reused, a large part of groundwater resources can be saved.
自動攪拌車在生產經營過程中不可避免產生大量的廢水,這種廢水不但含有砂石,水泥等常規的建筑材料,也含有各種混凝土添加劑,如果直接排放,會造成環境污染。而且,如果遇到雨天的話,雨水沖刷水泥,砂石等等混凝土原材料再次形成廢水,沒有合理的處理方式,會污染環境和污染附近的水源。我們可以在產生廢水的地方設排水溝,在排水溝終端設三級沉淀池,將固液分離,配置一臺自吸式水泵,將沉淀后的水循環使用,使整個生產區域的廢水實現經全部處理后循環使用,即達到環境排放標準。
In the process of production and operation, automatic mixer inevitably produces a lot of wastewater, which not only contains conventional building materials such as sand, cement, but also contains various concrete additives. If it is directly discharged, it will cause environmental pollution. Moreover, in rainy days, if the rain washes cement, sand and other concrete raw materials to form waste water again, there is no reasonable treatment method, it will pollute the environment and the nearby water source. We can set up a drainage ditch at the place where the wastewater is produced, and set up a three-stage sedimentation tank at the end of the drainage ditch to separate the solid and liquid, and configure a self-priming pump to recycle the water after sedimentation, so that the wastewater in the whole production area can be recycled after all treatment, that is, to meet the environmental discharge standard.
Thank you for reading, hope the above content is helpful to you, if you want to know more wonderful content, please click our official website: automatic mixer http://www.fxsgujg.cn .