在運輸混凝土時，通常不使用普通卡車，而在攪拌時使用混凝土攪拌車來運輸混凝土。 這不僅可以及時攪拌混凝土，防止混凝土變干，還可以更地將其移動到目的地。 如何操作混凝土攪拌車其排放桿？ 該知識將在以下內(nèi)容中介紹：
In the transportation of concrete, ordinary trucks are usually not used, but concrete mixer truck is used to transport concrete when mixing. This can not only mix the concrete in time to prevent it from drying, but also move it to the destination more safely. How to operate the discharge rod of concrete mixer truck? This knowledge will be introduced in the following contents:
1.在啟動混凝土攪拌車之前，應將攪拌桿置于“空擋”位置；
1. Before starting the concrete mixer, put the mixing rod in the "neutral" position;
2.啟動后，應將攪拌桿置于“卸載”位置，將水倒入桶中；
2. After starting, the mixing rod should be placed in the "unloading" position, and the water should be poured into the bucket;
3.裝載時，攪拌操作桿應置于“裝載”位置；
3. When loading, the mixing operating rod should be placed in the "loading" position;
4.運輸前，混凝土攪拌機卸料箱必須固定在“行駛”位置以防搖擺；
4. Before transportation, the concrete mixer discharge box must be fixed in the "driving" position to prevent swing;
5.操作操縱桿時，應在“中性”位置停留一會兒，然后再移
5. When operating the control lever, stay in the "neutral" position for a while, and then move to the "neutral" position
操作排料桿時，請嚴格遵循以下步驟：對于混凝土攪拌車的排料桿，只有用戶正確進行操作，才能讓車的效率更高，大家在操作過程中一定要找準位置。
When operating the discharging rod, please strictly follow the following steps: for the discharging rod of the concrete mixer, only the user can operate it correctly, can the efficiency of the truck be higher, and we must find the right position in the operation process.
點擊撥打服務熱線：4008791999
