攪拌車使用的時候，遇到出現氣壓不足的情況，要怎么來處理，作為攪拌一體車廠家，讓小編帶大家共同了解一下攪拌車系統出現氣壓不足要如何。
When the mixer truck is used, how to deal with the problem of insufficient air pressure? As a manufacturer of integrated mixer truck, let me show you how to solve the problem of insufficient air pressure in the mixer truck system.
如果攪拌車液壓泵有油輸出的情況發生，我們可以及時查看其工作是否正常。如不正常，有可能是壓力油路中的某個設備配件被卡在了其它原因，處于回油位置，導致壓力油路和溢流回路短路的情況發生，也可能是管接頭有松動的情況發生。
If the hydraulic pump of the mixer truck has oil output, we can check whether it works normally in time. If it is abnormal, it may be that a device accessory in the pressure oil circuit is stuck in the oil return position for other reasons, resulting in a short circuit between the pressure oil circuit and the overflow circuit, or a loose pipe joint.
當我們在油路中的某些設備漏油，或液壓缸、液壓馬達密封被損壞。排除的方法是直接拆掉相關設備進行清洗，看看是否有相應的設備損壞，該更換就更換，該檢查一下。
When some equipment in the oil circuit leaks oil, or the seals of hydraulic cylinders and hydraulic motors are damaged. The method of elimination is to directly dismantle the relevant equipment for cleaning, and see whether there is corresponding equipment damage. Replace it when it is time to replace it, and check it.
看看自動攪拌車的液壓泵是不是可以輸出液壓油的。如稱新型液壓泵，無液壓油，有可能是泵體有缺陷，讓吸油腔與壓油腔有相通的情況發生，失去了壓油能力，應及時找到更換。如果沒有新的液壓泵，沒有液壓油輸出，就有可能是轉向不當，部件磨損嚴重或損壞，及時更換。
See if the hydraulic pump of the automatic mixer can output hydraulic oil. For example, if the new hydraulic pump has no hydraulic oil, it may be that the pump body has defects, so that the oil suction chamber is connected with the oil pressure chamber. If the oil pressure capacity is lost, it should be found and replaced in time. If there is no new hydraulic pump and no hydraulic oil output, it may be improper steering, serious wear or damage of components, which should be replaced in time.
攪拌一體車的液壓系統可以設定正常壓力，有些管道或液壓缸在中間沒有壓力，可能是因為管路、小孔或節流閥、換向閥等部位堵塞。因此要仔細檢查檢查壓力是否有油通過，找出原因，但后來就排除了。
The hydraulic system of the integrated mixer can set the normal pressure. Some pipelines or hydraulic cylinders have no pressure in the middle, which may be due to the blockage of pipelines, small holes, throttle valves, reversing valves and other parts. Therefore, it is necessary to carefully check whether there is oil passing through the pressure to find out the cause, but it was later eliminated.
當
攪拌一體車的液壓泵輸出流量隨著壓力的增加而明顯降低，并且壓力不能達到規定的值，則是由于液壓泵磨損后的間隙加大。排出法是通過測定液壓泵的容積效率，確定該泵是否能夠繼續使用，對磨損嚴重的產品，一定要進行修理或更換。
When the output flow of the hydraulic pump of the integrated mixer truck decreases significantly with the increase of pressure, and the pressure cannot reach the specified value, it is due to the increase of the clearance after the hydraulic pump is worn. The discharge method is to determine whether the hydraulic pump can continue to be used by measuring the volumetric efficiency of the pump. Products with serious wear must be repaired or replaced.
以上就是今天為大家介紹的關于問題以及注意事項的全部內容，希望對大家能有所幫助，想要了解更多內容可以電話聯系我們或者關注我們的網站
http://www.fxsgujg.cn，我們的工作人員會及時與您取得聯系。
The above is all about the problems and precautions introduced to you today. I hope it can help you. If you want to know more, you can contact us by phone or follow our website http://www.fxsgujg.cn , our staff will contact you in time.
點擊撥打服務熱線：4008791999
