欧美成人午夜在线播放-成人午夜视频欧美-情欲毛片亚洲一区二区-日本亚洲欧美综合在线-欧美亚洲日本va

您好,歡迎光臨萊州聚峰機械有限公司網站! 主營自動攪拌車,攪拌一體車,自動上料攪拌車等各種規格的產品。

自動上料攪拌車生產廠家

點擊撥打服務熱線:4008791999

攪拌機制作的高不看這些就知道了!

發布時間:2021-10-08 來源:http://www.fxsgujg.cn/ 瀏覽量:0

概述:一、攪拌車檔次的確定1、 Determination of mixer grade投資方應充分了解國內外施工廠家的同行業產品質量水平,服務能力和信息,市
一、攪拌車檔次的確定
1、 Determination of mixer grade
投資方應充分了解國內外施工廠家的同行業產品質量水平,服務能力和信息,市場調研,現場考察廠家加工,質量保證能力。可通過召開答辯會,招標會等方式,選擇所需成套設備的生產廠家,選擇質優價廉的產品。根據資金歸屬,確定商品混凝土攪拌機的規模和等級。
The investor shall fully understand the product quality level, service capability and price information of domestic and foreign construction manufacturers in the same industry, market research, on-site investigation, manufacturer processing and quality assurance capability. Manufacturers of complete sets of equipment and products with high quality and low price can be selected by holding defense meeting, bidding meeting, etc. Determine the scale and grade of commercial concrete mixer according to the capital ownership.
二、攪拌車場地的選擇
2、 Selection of mixer site
選擇攪拌場地時,應確保場地離石料場和砂廠較近,以保證有足夠的水分,并遠離住宅區。如果我們能充分利用山坡地形,將物料場設置在山坡、較高的地面上,可以降低配料機的配料高度,使裝載機進料、爬坡角度小或不需要爬坡,既節省能源又減少磨損。設備基地的安裝應注意避開地上、地下光纜、電源或通信電纜。
When selecting the mixing site, it shall be ensured that the site is close to the quarry and sand factory to ensure sufficient moisture and away from the residential area. If we can make full use of the hillside terrain and set the material yard on the hillside and high ground, we can reduce the batching height of the batching machine, make the loader feed and climbing angle small or do not need to climb, so as to save energy and reduce wear. The installation of equipment base shall avoid aboveground and underground optical cables, power supply or communication cables.
三,骨料供應方式的選擇建議采用裝載機供料。
自動攪拌車
3、 For the selection of aggregate supply mode, it is recommended to use loader for feeding.
攪拌車的選用如用于高速公路工程施工(工期短、移動進行搬遷問題頻繁),則要通過選用快裝式、模塊式結構的攪拌車。
If the mixer is used for expressway construction (short construction period and frequent relocation problems), the mixer with fast loading and modular structure shall be selected.
第四,傳送帶機選
Fourth, conveyor belt selection
如場地寬闊,應優先發展選用小傾角18°,平皮帶機輸送生活方式(為降低企業設備公司采購管理成本,也可以通過選用有效提升料斗方式)。如果沒有場地面積不斷受到一定限制,可以充分考慮大傾角(一般為40°~50°)擋邊皮帶機(采用一些附加皮帶結構,可以同時達到90°)。但在砂石潮濕的環境下,大傾角擋邊皮帶機有粘砂的缺點,皮帶返程時,皮帶下面落砂現象分析比較具有嚴重,商品提高混凝土配比要考慮砂的利用相關系數。
If the site is wide, priority should be given to the development and selection of low inclination angle 18 °, flat belt conveyor transportation lifestyle (in order to reduce the procurement management cost of enterprise equipment companies, the effective lifting hopper can also be selected). If the site area is not continuously limited to a certain extent, the edge retaining belt machine with large inclination angle (generally 40 ° ~ 50 °) can be fully considered (some additional belt structures can reach 90 ° at the same time). However, in the wet environment of sand and gravel, the large angle edge retaining belt conveyor has the disadvantage of sticking sand. When the belt returns, the analysis of sand falling under the belt is more serious. The utilization correlation coefficient of sand should be considered to improve the proportion of commercial concrete.
我們來看看集料混合的選擇
Let's look at the choice of aggregate mixing
一個完整的,商業混凝土攪拌機集料規模是1規模的累計計量和2-4規模的個人計量。為了保證每個骨料有足夠的貯存容量,可將每個骨料設計成2個稱重配料。
The aggregate scale of a complete, commercial concrete mixer is the cumulative measurement of scale 1 and the individual measurement of scale 2-4. In order to ensure that each aggregate has sufficient storage capacity, each aggregate can be designed into 2 weighing ingredients.
如果企業施工技術要求相對較低時,選用2種骨料累計價值計量的配料機;如果一個工程有特殊的要求,則必須通過選用3種或4種骨料秤累計計量的配料機,甚是每種骨料可以單獨使用計量的配料機。
If the enterprise's construction technical requirements are relatively low, two batching machines measuring the aggregate cumulative value shall be selected; If a project has special requirements, the batching machine for cumulative measurement must be selected by selecting 3 or 4 aggregate scales, or even the batching machine for each aggregate can be used separately.

截屏,微信識別二維碼