欧美成人午夜在线播放-成人午夜视频欧美-情欲毛片亚洲一区二区-日本亚洲欧美综合在线-欧美亚洲日本va

　　During the daily operation of the automatic feeding mixer, it may encounter the situation of sudden ignition and power failure, so how to deal with it at this time? Let's read about it.

　　自動上料攪拌機是一種在筒體或罐體中用葉片旋轉軸，將多種原料攪拌混合，使其成為混合物或合適稠度的機器。廣泛應用于涂料、固體、油墨、顏料、膠粘劑等化工產品的攪拌、分散、溶解的設備。

　　Automatic feeding mixer is a machine in a cylinder or tank with blades rotating shaft, mixing a variety of raw materials, so that it becomes a mixture or a suitable consistency. Widely used in coating, solid, ink, pigment, adhesives and other chemical products of stirring, dispersing, dissolving efficient equipment.

　　自動上料攪拌機的料斗在上升過程中如果突然停電也沒關系，因?yàn)樯厦鏁袆x車，可以及時有效的控制。如果在運行過??程中突然斷電，要立即關閉自動上料攪拌機的主電機和上料系統的總開關，并將所有調速旋鈕調到原位。

　　If the hopper of automatic feeding mixer is in the process of rising, it does not matter if there is a sudden power failure, because there will be brakes on it, which can be timely and effectively controlled. If running?? During the process of sudden power failure, first of all, to immediately close the main motor of the automatic feeding mixer and the main switch of the feeding system, and adjust all speed control knobs to the original position.

　　如果自動上料攪拌車在滿負荷運行時突然斷電或發生故障，應先將開關拉下，手動清理攪拌筒內的混凝土?？刂埔蟛辉试S攪拌機帶載啟動，以防止啟動時因電流過大損壞電機。自動上料攪拌車操作簡單，要在有木板的操作臺上操作。啟動時，如發生火災或電壓突然下降等情況，應立即停止啟動，切斷電源，并進行檢查維修。

　　If the automatic feeding mixer is suddenly powered off or fails when it is running at full load, the switch should be pulled down first and the concrete in the mixing cylinder should be cleaned manually. The control requirements do not allow the mixer to start with load, in order to prevent the motor from being damaged due to excessive current when starting. Automatic feeding agitator is simple to operate and must be operated on a board operating table. When starting, in case of fire or sudden voltage drop, stop starting immediately, cut off the power supply, and check and repair.

　　如果停電時間比較短，在恢復供電時，注意將料筒加熱到工藝溫度后，保持一段時間的恒溫。然后測試真石漆設備的旋轉阻力。如果比較容易，打開低速電機繼續工作。如果設備啟動時轉速不穩定，應立即停機查明原因，排除故障后再啟動運行。

　　If the power failure time is short, when restoring the power supply, pay attention to heating the barrel to the process temperature, and keep the constant temperature for a period of time. Then test the rotary resistance of the lacquer equipment. If it is easier, turn on the low speed motor and continue working. If the speed of the equipment is not stable when starting, it should be stopped immediately to find out the cause, and then start running after troubleshooting.

　　如果停電時間較長，需要停產，則應清洗桶內原料和桶內。待自動上料攪拌機冷卻后，整理機內原料，再將機內筒體上的粘料清理干凈。清洗后，可以在真石漆設備內部涂上一層防銹油，將機器放在通風干燥的地方，下次繼續生產。

　　If the power outage is long and production needs to be stopped, the raw materials and barrels should be cleaned. After the automatic feeding mixer is cooled, the raw materials in the machine will be sorted out, and then the adhesive material on the barrel body will be cleaned up. After cleaning, you can coat the interior of the lacquer equipment with a layer of anti-rust oil, put the machine in a ventilated and dry place, and continue to produce the next time.

　　總而言之，自動上料攪拌車在作業中會遇到各式各樣的突發狀況，我們只有認真做好設備的養護和維修，才能保證設備穩定的運行。更多自動上料攪拌車詳細咨詢，請繼續關注http://www.fxsgujg.cn網站吧。

　　In a word, the automatic feeding mixer will encounter all kinds of emergencies in the operation. Only by carefully maintaining and maintaining the equipment can we ensure the efficient and stable operation of the equipment. For more details on automatic feeding mixer, please continue to pay attention to http://www.fxsgujg.cn.