概述:1,攪拌車底盤為專用底盤,配置變速箱是法士特高低檔,起步時確保高低檔撥桿在低檔位。1 The chassis of the mixer truck is a s
1,攪拌車底盤為專用底盤,配置變速箱是法士特高低檔,起步時確保高低檔撥桿在低檔位。
1. The chassis of the mixer truck is a special chassis, and the gearbox is equipped with fast high and low gears. When starting, ensure that the high and low gear paddles are in the low gear.
2,按手冊要求定期到陜汽服務站保養,動力總成如有異常,由濰柴服務站承保。
2. Regularly go to Shaanxi Automobile Service Station for maintenance according to the manual. If the powertrain is abnormal, it shall be underwritten by Weichai service station.
3,上裝液壓件部分,減速機加油口加注齒輪油,散熱器加注液壓油,如因誤加其他品類油品,需及時排空,運轉會造成液壓件損壞。定時換油和檢查液位(約三個月),如因操作不當造成液壓件損壞,廠家發件維修會收取必要材料工費
3. For the part of loading hydraulic parts, gear oil shall be filled at the oil filler of reducer and hydraulic oil shall be filled at the radiator. If other types of oil products are added by mistake, they shall be drained in time, and the operation will cause damage to hydraulic parts. Regularly change the oil and check the liquid level (about three months). If the hydraulic parts are damaged due to improper operation, the manufacturer will charge the necessary material and labor cost for the repair
4,駕駛室及車尾操作桿:車輛正常啟動后,按車身標示方向操作檔桿,可控制罐體正反轉(裝卸料及加速轉),正反切換時,需停留在空擋位置待罐體停轉后再做相反操作,否則可能造成液壓泵損壞。
4. Cab and rear operating lever: after the vehicle is started normally, operate the gear lever according to the marked direction of the vehicle body to control the forward and reverse rotation of the tank (loading and unloading and accelerating rotation). During the forward and reverse switching, stay in the neutral position and do the opposite operation after the tank stops, otherwise the hydraulic pump may be damaged.
5,供水系統:由水箱及氣控箱,管道組成,加水(放水)時,需保證氣控箱旋鈕處于正確位置,否則不能正常給排水并容易造成氣控箱損壞,低溫情況下長時間停車,請放空水箱中的存水。加壓供水時,由于西藏屬于高原低壓地區,請根據實際情況調整使用氣壓。
5. Water supply system: it is composed of water tank, air control box and pipeline. When adding water (discharging water), it is necessary to ensure that the knob of the air control box is in the correct position, otherwise the water supply and drainage cannot be normal and the air control box is easy to be damaged. If it is shut down for a long time under low temperature, please vent the water stored in the water tank. During pressurized water supply, since Tibet belongs to plateau low-pressure area, please adjust the use pressure according to the actual situation.
6,請根據副車架貼有標示位置指示,定時到服務站或自行往黃油嘴中加注黃油。
6. Please regularly go to the service station or fill the grease nozzle by yourself according to the marked position instructions pasted on the subframe.
7,緊固件:在正常使用過程中,會自然發生緊固件(螺栓,U型栓)變松的狀況,請車輛實際使用人定時對緊固件進行加固處理。
7. Fasteners: during normal use, the fasteners (bolts, U-bolts) will become loose naturally. Please ask the actual user of the vehicle to strengthen the fasteners regularly.