概述： 今天我們會為大家?guī)碜詣?dòng)上料攪拌車的構造，希望通過我們的介紹讓您對等問題有更深入的了解。 Today we will bring you the
今天我們會為大家?guī)?a href="http://www.fxsgujg.cn">自動上料攪拌車的構造，希望通過我們的介紹讓您對等問題有更深入的了解。
Today we will bring you the structure of the automatic feeding mixer. We hope that through our introduction, you can have a more in-depth understanding of the problem.
1、取力裝置
1. Power take-off device
自動上料攪拌車采用主車發動機取力方式。取力裝置的作用是通過操縱取力開關將發動機動力取出，經液壓系統驅動攪拌筒，攪抖筒在進料和運輸過程中正向旋轉，以利于進料和對混凝土進行攪拌，在出料時反向旋轉，在工作終結后切斷與發動機的動力聯接。
The automatic loading mixer adopts the main vehicle engine power take-off mode. The function of the power take-off device is to take out the power of the engine by operating the power take-off switch, and drive the mixing drum through the hydraulic system. The stirring drum rotates forward in the process of feeding and transportation to facilitate the feeding and mixing of concrete. It rotates reversely when discharging, and cuts off the power connection with the engine after the end of the work.
2、液壓系統
2. Hydraulic system
將經取力器取出的發動機動力(一般都是后置全功能取力器)，轉化為液壓能(排量和壓力)，再經馬達輸出為機械能（轉速和扭矩），為攪拌筒轉動提供動力。
The power of the engine taken out by the power take-off device (generally full-function power take-off device at the rear) is converted into hydraulic energy (displacement and pressure), and then output to mechanical energy (speed and torque) through the motor to provide power for the rotation of the mixing drum.
3、減速機
3. Reducer
將液壓系統中馬達輸出的轉速減速后，傳給攪拌筒。
After decelerating the speed of the motor output in the hydraulic system, it is transmitted to the mixing drum.
4、操縱機構
4. Control mechanism
a．控制攪拌筒旋轉方向，使之在進料和運輸過程中正向旋轉，出料時反向旋轉。
a. Control the rotation direction of the mixing drum to make it rotate forward in the process of feeding and transportation, and reverse rotation when discharging.
b．控制攪拌筒的轉速。
b. Control the speed of mixing drum.
5、攪拌裝置
5. Mixing device
它主要由攪拌筒及其輔助支撐部件組成。攪拌筒是混凝土的裝載容器，它是由耐磨薄鋼板制成，為了能夠自動裝、卸混凝土，其內壁焊有特殊形狀的螺旋葉片。轉動時混凝土沿葉片的螺旋方向運動，在不斷的提升和翻動過程中受到混合和攪拌。在進料及運輸過程中，攪拌筒正轉，混凝土沿葉片向里運動，出料時，攪拌筒反轉，混凝土沿著葉片向外卸出。攪拌筒的轉動則是靠液壓驅動裝置來保證。裝載量為3～6立方。的自動上料攪拌車一般采用由汽車發動機通過動力輸出軸帶動液壓泵，再由高壓油推動液壓馬達驅動攪拌筒，裝載量為9～12立方的則由車載輔助柴油機帶動液壓泵驅動液壓馬達。葉片是攪拌裝置中的主要部件，損壞或嚴重磨損會導致混凝土攪拌不均勻。另外，葉片的角度如果設計不合理，還會使混凝土出現離析。
It is mainly composed of mixing drum and its auxiliary supporting parts. The mixing drum is a concrete loading container, which is made of high-quality wear-resistant thin steel plate. In order to automatically load and unload concrete, its inner wall is welded with spiral blades of special shape. When rotating, the concrete moves along the spiral direction of the blade, and is mixed and mixed in the process of continuous lifting and turning. In the process of feeding and transportation, the mixing drum rotates forward, and the concrete moves inward along the blade. When discharging, the mixing drum reverses and the concrete is discharged outward along the blade. The rotation of the mixing drum is ensured by the hydraulic driving device. The loading capacity is 3-6 cubic meters. In general, the truck engine drives the hydraulic pump through the power output shaft, and then the high-pressure oil drives the hydraulic motor to drive the mixing drum. For the truck with a loading capacity of 9-12 cubic meters, the auxiliary diesel engine on board drives the hydraulic pump to drive the hydraulic motor. Blade is the main part of the mixing device, damage or serious wear will lead to uneven mixing of concrete. In addition, if the angle of blade is not reasonable, it will cause concrete segregation.
6、清洗系統
6. Cleaning system
清洗系統的主要作用是清洗攪拌筒，有時也用于運輸途中進行干料攪拌。清洗系統還對液壓系統起冷卻作用。
The main function of the cleaning system is to clean the mixing drum, and sometimes it is used for dry material mixing during transportation. The cleaning system also cools the hydraulic system.
7、封閉裝置
7. Closure device
全封閉裝置采用回轉密封技術，密封了攪拌車的進出料口自動，自動上料攪拌車的構造了傳統攪拌車水份蒸發、砂漿分層、砼料撒落、行車等系列問題。
The fully closed device adopts rotary sealing technology to seal the automatic inlet and outlet of the mixer. The structure of the automatic feeding mixer solves the problems of water evaporation, mortar stratification, concrete material scattering and driving safety of the traditional mixer truck.
The above is about the automatic feeding mixer structure composition related content, I believe you all know, if you want to know more, welcome to click our automatic feeding mixer http://www.fxsgujg.cn Website.
點擊撥打服務熱線：4008791999
